Reusable A.T.A. Shipping Cases

Exterior Framework
In the manufacturing stages, American made plywood is laminated to shatterproof, high impact ABS plastic. The panels are then slotted to lock into a rivetless 90-degree extruded aluminum track. This edge angle track is a proprietary Flight Form feature. It has an integral inside web that adds considerable "beam" strength and keeps overall weight to a minimum. Positive interlocking tongue in groove aluminum extrusions complete the framework adding case stiffness. As a result of this unique design and construction, shock caused from impact is evenly distributed over entire panels. This uniform distribution minimizes the threat of damage to your equipment and promotes longer case life. Others use an outside 90-degree angle only, which has far less beam strength. These other cases are further weakened by rivets which not only elongate in the wood, allowing panels to shift and distort, but also concentrate shock upon impact. Flight Form cases, when dropped, distribute the shock evenly due to the inherent support of our unique rivetless extrusion. There are no rivets to snag clothing, leaving a clean exterior appearance.

Others who use a rivetless extrusion crimp their inside aluminum angles leaving a void which will crush or further distort the case upon diagonal impact. Either of these two practices make it difficult at best to replace punctured panels. Flight Form case panels, in the event of damage or puncture due to freight abuse, are easily replaced at a fraction of the cost of a new case. In addition, our aluminum extrusions are anodized which not only hardens the material surface but also keeps hands and clothing from turning black when touched.

Quality Built In
Case interiors are designed for optimum shock absorption. Based on the characteristics of your equipment, we carefully select the proper interior padding from a wide variety of cushioning materials available. The most common lining is a hi-density, non-flaking polyester foam which insulates your equipment from shock. Other lining materials include closed-cell extra hi-density polyurethane, crosslink, and XPE foams, carpeting, vinyl, and fabric. These materials can easily be combined in any case interior, insuring that your equipment receives the best possible protection while being transported.